Malfunctions; Technical Specifications; General Specifications - ELRO KT100 Gebrauchsanweisung

ermo- Press on "mode" (15) first to enable
ck in the delay. Then press "DLY" (12) until
evi- "DLY" appears on the display and exit
ollow with "ok" (14). To turn off the delay, fol-
s . low the same procedure but make
sure that "DLY" is not shown in the dis-
play.
The function "1C/2C"
to You can set the permissible temperature
em. fluctuation or "span". The span deter-
HT" mines how much the ambient tempera-
or a ture may increase or decrease before
t the the thermostat responds. For example:
hen with a span of 1°C and a comfort tem-
d perature set to 20°C, the temperature
may decrease to a maximum of 19.5°C
(for a heating system) or increase to
20.5°C (for a cooling system) before the
your thermostat responds. To set the span,
ng first press "mode" (15) and then press
ther- "1C/2C" (11) until you see the desired
r it span in the display. Exit with "ok" (14).
s.
0504_ELRO_KT100 thermostat_CH_130x73_2.indd 9

5 Malfunctions

Malfunction Cause
Information on the - Batteries are empty
display is not visible - Batteries placed wrong
Strange characters - Failure in software
on display
Temperature is not - Thermostat is too close to a heat source,
well regulated exposed to the sun or draught
- The span is set too wide
- Set the span to 1 °C
6 Technical specifications
6.1 General specifications
Product description
Name: Programmable room thermostat
Model/Type: KT100
Technical product specifications
Batteries: 2 penlight alkaline type
9
Solution
- Replace
- Press the
reset key
- Move the
thermostat
AA/ LR6
Switching Voltage: 24V AC and 230V
AC
Switching Current: max. 6 Amp
Measuring Range: 0 .... 40°C
Adjustable Range: 5 ... 30°C
Measuring Accuracy: +/- 0.5°C
Temperature span: 1°C or 2°C
adjustable
Programs: 10 presets, 10 to be modified
07-09-12 15:32