Vasner Appino 20 Silver Bedienungsanleitung Seite 19

be installed by a qualified electrician who can guarantee the dust- and water-
tightness.
Wall installation distances:
Ceiling
min. 0.5 m
Window
Floor
Commissioning
After switching the heater on using the On/off switch, you can control the
heater in three ways: using the remote control, the app or by simply pressing
the reset button on the side of the housing.
Operation using the remote control:
1. Insert two AAA 1.5 V batteries in the remote control. When using the
infrared remote control, always point it directly at the heater as it does not
work if there are any obstacles between the remote control and the heater.
2. Plug the heater into the socket
3. Then press the On/off switch (3.) on the side of the heater. The switch must
be in the "I" position. The blue LED (7.) on the front of the heater lights up.
4. Switching on: Now press the "On" button on the remote control to switch
on the heater. The heater first switches on at 33%, "Gentle start".
After 4 seconds, it returns to the heating setting that was last selected.
min. 1.8 m
GB
VASNER
Ceiling installation distances:
Ceiling
Window
Floor
Bracket
min. 1.8 m
19