Installation - Vasner Appino 20 Silver Bedienungsanleitung

Description and accessories
The Appino 20 is the latest infrared heater that features Bluetooth and app
control, and can be installed in a variety of ways.
The Appino 20 scope of delivery includes the following
components:
Appino 20 infrared heater with plug:
1. Hanging bracket on the heater to fit various
installation brackets (rear)
2. Bluetooth antenna (rear)
3. On and off switch (side)
4. Reset button (side)
5. Holes for optional chain bracket (rear)
6. Bluetooth status LED (blue) (front)
7. "On" operating display, blue LED (front)
Accessories:
8. Wall-, ceiling bracket
9. screws with metal dowels
for wall installation
10. 2 wing screws and nuts
11. Allen key for positioning the
main screw for the installation brackets
12. Remote control (batteries not included)
13. 1 user manual

Installation

1. Remove the heater from its packaging and remove any packaging
materials from the heater and accessories. It is particularly important to
remove the foam strips that protect the bars during transport. Carefully
pull these strips away from the heater in the direction of the arrow.
If you have tested the heater function before installing it, allow it to cool
before installing it.
6./7.
4.
GB
VASNER
1.
5.
2.
3.
17