Bell UR900 Anleitung Seite 13

PT902 Bodypack
POW: ON/Mute/OFF
01
F
Microphone is switched on.
(Display: ON) RF + AF active
F
AF is muted (interrupted)
F
AF is again activated
*
Microphone is switched off.
IR Diode:
03
SET / UP
02
Access to parameters which may be modi-
fied:
*
SET:
F
SET:
F
SET-SET: CH=UHF channel
F
SET-SET-SET:
R
= Parameter may be changed while display is flashing.
Fr
Increases the value by one step
Fs
Decreases the value by one step
*r
Scroll upward (increases value)
*s
Scroll downward (decreases value)
CH: (channel indicator)
05
06 Vol: (Volume)
Audio level, variable from 0 to 16 (max). Extremely low output levels
may cause audible noise (hiss), extremely high levels may cause audi-
ble distortion.
BATT LOW (red LED)
11
XLR (Mini) Socket
12
Connects Headset microphone BELL HS904.
The Bodypack (pocket transmitter) PT902 comes with a metal clip to
attach it to a belt, the inner pocket of a jacket or any other suitable
and comfortable places.
(Display:OFF)
siehe IR SYNC
r s
/ DOWN
Access is unlocked
(Lock symbol open)
V=Audio volume
Select output power
5mW or 10mW
R
R
R
Shows the active channel (CH & MHz)
Batteries must be changed immediately
13
l j
11
POW
IR
n o
m
CH:02 VOL: 16dB
823.100
10mW MHZ
q
r
13
k
SET
+
Alkaline
Battery AA (1.5V)
Alkaline
Battery AA (1.5V)
12
p
+