General Information - ravioli JRAEA Series Bedienungsanleitung

RECEIVER UNITS JRAEA-JRAEB

General information

The receiver described in this manual, in its different versions, has been designed in order to be matched
with the 'J-Line' transmitter units -both pushbutton and joystick versions.
Thanks to its relay outputs, the receiver can easily interface miscellaneous applications.
ALLOWED APPLICATIONS
Control of lifting and transport machines, like cranes, hoists, operative machines, etc.
In case more radio remote controls work simultaneously in the same working area, it is
compulsory to identify the transmitter unit and its corresponding radio-controlled
machine.
NOT ALLOWED APPLICATIONS
Machines for people handling and lifting/transport and in those cases where
explosion-proof features are required.
Applications for direct control are never allowed.
PRE-INSTALLATION ACTIVITIES
According to what the Norm foresees, it is compulsory to achieve, before the
installation, a thorough RISK ANALYSIS, in order to verify if the machine can be
equipped by a radio remote control or not.
The machine manufacturer or the person checking the radio remote control
installation is responsible for the correct development of such analysis.
In any case it is compulsory to respect the current norms about safety and prevention
of accident.
In case of using the device in States not belonging to the European Union, it is
compulsory to verify its compliance with the laws ruling both the machine and the
radio remote control use.
Before installation it is also necessary to verify the presence of the identification tag,
reporting technical data, CE mark and the part number. refer also to 'Outdoor receiver
units' –
In case such identification tag is missing or defective, you have to contact promptly
Ravioli Assistance.
We remind that presence of identification data is compulsory according to relevant
norms and laws.
RAVIOLI shall not be considered responsible for non-
compliance with the a.m. directions
—————————
16
———————————————
ENG