Drive Mechanism - BERG Toys Freestyler 2WD Gebrauchsanweisung

5.3 Steering
The steering mechanism must be checked every month on the following points:
•
Breakage, wear and / or damage to all parts of the steering mechanism.
•
The bolts are firmly in place.
•
Check X = Y-5mm (see Fig 5.1).
Y
X
X=Y-5mm
5.4

Drive mechanism

5.4.1 Chain
The chain must be greased regularly to keep it running smoothly. if the chain is too
taut, the BERG Freestyler will be heavy to pedal and there is also a good chance that
the chain will break. If the chain is not tight enough, it will easily jump off the teeth on
the gear wheel and the chain case may also be damaged. The process for tightening
the chain is described in Fig 5.2. To tighten the chain: Loosen the nut and bolt
a little and then tighten the chain with the nut
again.
I
II
. Then tighten the nut and bolt
EN
17
5
Fig 5.1
and
and
Sheet nr. 49.90.50.50