thomann Denon DN-300DH Benutzerhandbuch Seite 8

8. Display Button: When in FM or DAB+ mode, press this button to show different
operation information on the screen when RDS data has been received. Press the
Display button once for PS (program name), again for PTY (program type), then CT
(current time), the signal strength meter, and lastly RT (information). NO PS, NO PTY, NO
CT or NO RT will appear if the required function cannot be carried out. (e.g. due to a
weak signal.)
• PS (Station Name): Press the Display button until "PS" appears. The current
station name will be shown.
• PTY (Program Type): Press the Display button until "PTY" appears. The program
type will be shown.
• CT (Current Time): Press the Display button until "CT" appears on the display. The
current time will be shown (e.g. 15:30). If the display shows "WAIT CT", then it is
attempting to get the time from the station.
Note: Unless the clock is synchronized to an accurate source, the time may be
inconsistent from station to station.
• Signal Strength Meter: Press the Display button until the signal strength bar
appears on the display. The station's signal strength will be shown.
• RT (Information): Press the Display button until "RT" appears. The relevant
information transmitted from the local radio station will be shown.
9. Number Buttons (1–10/10+): Press buttons 1-10/10+ on the remote control to recall a
saved preset from 1-10. To recall presets higher than 10, press the 10/10+ button on the
remote control followed by the additional number button to get to the desired preset (e.g.
to get to preset 12, select 10/10+ followed by 2). To get to preset 20, press the 10/10+
button twice.
10. Memory Button: To save a preset, press the Memory button, then press a Number button
(1–10/10+) to select location, and press the Memory button again to save the current
station to that preset number. See
11. Region: Press this button, then select the region (America/Europe/Japan) with the
Tuning Up/Down buttons, then press the Region button again to confirm the region. The
unit will then automatically power off. Press the Mute button to power on the unit or
double press the power button on the front of the unit to be set to your selected region.
Note: Changing from one Region to another will overwrite all previously stored radio
station presets.
8
Operation > Using the Radio for more information.