Troubleshooting; Accessories - SCHOTT EasyLED Spotlicht Plus Gebrauchsanweisung

EasyLED Spotlight Plus - Operating Instructions

4. Troubleshooting

Should you be unable to correct the fault you are experiencing applying the measures listed below,
turn to your authorised dealer or the next SCHOTT dealership. More extensive repairs have to be
performed by authorised service technicians.
Type of the fault
Lamp off
Light intensity decreasing
5. Accessories for your EasyLED Spotlight Plus System
We offer an extensive range of accessories to complement your EasyLED Spotlight Plus System.
Only SCHOTT accessories guarantee perfect operation, safety and optimum light yield.
You can install screw on filters acting as optical filters in front of the LED head. Please refer to our
catalogue for details on the standard types of filters we carry.
We also offer mounting adapters for our EasyLED Spotlight Plus System that match microscope
stands and swivel arms. We either include these adapters with your light source, or you can order
them separately. Refer to our catalogue for a detailed description of the available models.
If not mounted to a stand or swivel arm, the instrument can also be installed to a base as a
standalone unit by means of a corresponding mounting device. More information is, again, provided
in our catalogue.
PI_69
Possible cause
Instrument not switched on
Plug not in socket
No mains voltage
LED head overheated
Remedy
Switch the instrument on
Insert the plug
Check mains voltage
Provide sufficient cooling, and
allow the instrument to cool down
before resuming operation
8/10