Important Information - SCHOTT EasyLED Spotlicht Plus Gebrauchsanweisung

EasyLED Spotlight Plus - Operating Instructions

1. Important information

Symbols used:
Symbol Meaning
Warning of danger (caution, obey documentation)
!
Mains voltage On/Off
LED radiation (caution, do not look directly into the beam!)
Intended use:
The EasyLED Spotlight Plus System is intended to provide lighting in stereomicroscopy applications
used in industry and laboratories. It is designed to intensely illuminate objects of all kinds.
According to the EN 62471:2008 standard, the EasyLED Spotlight Plus System is a product of Risk
Class 2.
The EasyLED Spotlight Plus System is in compliance with the following directives of the European
Community:
2006/95/EC (Low Voltage Directive)
2004/108/EC (EMC Directive)
2011/95/EC (RoHS)
The illumination system's observance of the basic requirements set forth in the directives mentioned
above is verified by the technical documentation and by full compliance with the standards listed
below:
EN 61010-1:2010
EN 61326-1:2013
EN 55011:2009 + A1:2010
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2013
!
Safety information:
Please read and observe these instructions carefully. The instrument's safety cannot be
guaranteed unless you observe the operating instructions.
Never look directly into the light emitting aperture of the spotlights during operation (danger
of ophthalmic injury)!
The EasyLED Spotlight Plus System emits high intensity visible light. As light absorbing materials
have the physical property of converting incident light into heat, damage may occur to heat sensitive
PI_69
4/10