Remote Control Description - nedis SPYCCL10CSR Anleitung

Remote Control Description

1. On/off button
2. Start/stop recording audio and
video
3. Start/stop recording audio
4. Activate/deactivate motion
detection
5. Photo function
Before use
1. Slide the cover at the right side of the clock backwards to
get access to the connections (see images above).
2. It is recommended to charge the battery first. Make sure the
on/off switch is set to off. Connect the USB cable with the
mini USB plug to the USB connection of the clock and the
USB plug at the other end of the cable to a USB connection
of a computer/notebook or the included AC/DC adapter.
3. During charging the indicator lights up red and the green
indicator will be slowly flashing. The battery is fully charged
after 3 to 4 hours. After charging the green indicator will
be on. Note: for optimal performance of the battery it's
recommended to charge the battery for 12 hours the first
three times.
4. Insert a Micro SD card before proceeding.
3
ENGLISH