Intended Use; Adjusting The Cutting Height - Elem Garden Technic TDAM30BAG Bedienungsanleitung

3. Intended use

The hand mower is designed for cutting grass.
It is intended for private use, i.e. for use in home
and gardening environments. Private use here
refers to the maintenance of small-scale, residential
areas and does not include public facilities, sporting
halls, or agricultural/forestry applications.
Important. Due to the high risk of
bodily injury to the user, the hand
mower may not be used to cut
scaling vegetation, planted roofs, or
balconygrown grass.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be
a case of misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Assembly
4.1 Mower assembly
Screw the push bar top section to the two
push bar extensions . Use the two screws and two
hexagonal nuts for this purpose.
Screw push bar bottom section A, push
bar bottom section B and the two push bar
extensions together.
First attach one push bar bottom section to the
mower, then press the push bar together slightly
and attach the other side.
4.2 Grass box assembly
A. Push the bar frame into the grass box tube.
B. Snap the side fastening lugs on the grass box
over the bar frame.
C. Snap the bottom fastening lug on the grass box
over the bar frame.

5. Adjusting the cutting height

cutting heights can be set between a range of 12 –
45 mm. To do so, pull the spring-loaded bolts (A) on
both sides of out and then engage them in the
required holes.
6. Adjusting the counter blade
Note: The counter blade (B) is only be adjusted
before using the machine for the first time or if the
blades on the mower spindle are worn.
Undo the adjusting nuts (C) (10 mm) on both sides
and adjust the counter blade to the required
position.
The counter blade (B) is correctly adjusted if a piece
of paper placed between the blades on the mowing
spindle and the counter blade is cut if you turn one
of the wheels forwards by hand.
7. Attaching the grass box
Attach the assembled grass box to the roller.
The grass box must also be secured to the push bar
using the belt supplied.