BeeWi BBK300 Bedienungsanleitung Seite 6

6
side of keyboard. The green LED will light for 2 seconds then it will start
blinking roughly every second. Now the Mini Bluetooth keyboard is under
pairing state and it's waiting for connecting with your device. Once the
pairing done, the light will turn off.
2. DRIVER INSTALLATION & CONNECTION WITH DEVICES
Before using the keyboard, it will be necessary to install a dedicated driver
in your Smartphone. The following sections are describing the installation,
pairing and connection procedure for each system.
2.1. iPhone (OS 4.0) / iPad
You don't need any driver to connect BBK300 to iPhone. Follow the below
instructions on iPhone and keyboard:
1. Check that keyboard is in pairing mode.
2. On iPhone, open Settings and select Bluetooth. Enable Bluetooth if
disabled.
3. in the Bluetooth devices list, search for « BeeWi BBK300 » and select
to pair.
4. Enter the pairing code displayed on screen on the keyboard and
confirm with Enter.
5. Pairing and connection are confirmed on iPhone. You can now use
your BBK300
ENGLISH