6.
Connection
6.1.
Connecting the luminaire to the mains voltage
NOTICE: Material damage caused by wrong mains voltage.
Damage or destruction of the light.
Check whether the mains voltage matches the nominal voltage and the
X
frequency specified on the rating plate and make sure that they match.
Connect the connecting cable of the luminaire to the power supply unit.
X
Plug the power supply unit into a socket
X
6.2.
Connecting the luminaire to the 24 V supply voltage (SELV)
NOTICE: Material damage caused by wrong mains voltage.
Damage or destruction of the luminaire.
The connection must be made by a trained skilled electrician only.
X
Compare the mains voltage with the nominal voltage and the frequency
X
specified on the rating plate and make sure that they are identical.
Operate the luminaire at safety extra low voltage (SELV) only.
X
NOTE: Please observe the pin assignment.
Plug the plug into the socket provided for this purpose.
X
Fig. 4: Power supply with plug adapters.
Tab. 1: Pin assignment.
Designation
2
1 DC +; 2 DC -; 3 Not connected
www.hoffmann-group.com
1
3
DE
DE
EN
FR
FR
IT
IT
ES
ES
15