Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important information
PLEASE READ THE FOLLOWING INFORMATION CAREFULLY AND RETAIN THIS
MANUAL FOR FUTURE REFERENCE.
•
You can find the product code and serial number of the Microchip Reader on the inside of
the battery cover.
•
Please make sure you have all the parts listed on page 1.
•
To register this product's warranty visit: sureflap.com/suresense-warranty
•
Only use the USB cable provided and do not insert any foreign objects into the product.
This product is not waterproof.
•
The reader requires two alkaline AA batteries, which should be inserted
•
and replaced with caution. Do not mix different types of batteries or new
and used batteries. If the unit is going to be unused for a long period, please
remove the batteries.
Safety warnings
•
This product uses RFID (Radio Frequency Identification) and therefore may cause
problems with sensitive electronic medical devices such as pacemakers and
monitors within a 1 metre radius.
•
Do not use this product if parts are missing, damaged or worn.
•
Keep small parts out of reach of children and animals. Children should not be
permitted to play with the SureSense Microchip Reader. It is not a toy and should not
be treated as such. However, the Microchip Reader can be used by children aged 8 years
and above and also by persons with reduced physical, sensory or mental capabilities as
long as they are supervised.
Technical specifications
Size:
136mm (L) x 63mm (W) x 29mm (H) (5 3/ 8 '' x 2 1/ 2 '' x 1 1/ 8 '')
Battery life:
6 months (Typical usage at 3 reads per day, with good
quality alkaline AA batteries)
Compatible microchips:
ISO FDX-B (15-digit)
Readable temperature range:
+33
C to +43
C (+91.4
F to +109
F)
o
o
o
o
If the Microchip Temperature doesn't fall within this range an
out of range symbol will be displayed, see page 5.
3
Maximum reading distance:
Up to 95mm (3 3/ 4 '') away from the
microchip, depending on microchip
type and orientation.
Storage temperature:
-10
o
C to +70
o
C (+14
o
F to +158
o
F)
Operating temperature:
-5
C to +55
C (+23
F to +131
F)
o
o
o
o
Working frequency:
134 kHz (RFID)
Batteries
AA
x2
To insert batteries please follow the steps below.
1
Remove the battery cover by pressing the arrow
and sliding it away from the centre.
This icon will be displayed when the batteries begin to run low. Always use 2 high
quality alkaline AA batteries.
How to take a reading
To read an animal's microchip, please follow the steps detailed below.
1
2
Press the button on the
Press the button again and move the
reader to turn it on.
reader around the animal, following
(It will automatically
one of the Motion Patterns detailed
turn off when not in use)
below to locate the microchip.
To locate the microchip, hold the reader close to the animal's neck, then move it in either one of
the suggested Motion Patterns pictured below.
Motion Pattern 1
Side to side
across the body
Changing the temperature unit between˚C & ˚F
To change the unit of temperature for the reader, first remove the
batteries. Then
press and hold the reader's button whilst re-inserting
the batteries. The Microchip Temperature will now be displayed in
Fahrenheit. To revert back to Celsius, repeat the process.
EN
2
Insert the batteries making sure the + and -
symbols are the correct way round.
When the reader detects the
microchip it will display its
number and, if applicable,
Microchip Temperature.
Motion Pattern 2
Up and down
the body
4
Werbung
Inhaltsverzeichnis
Fehlerbehebung
