Power Supply Operation; Changing Battery - Reinecker Reha-Technik miniMAX Gebrauchsanweisung

13. Power supply operation

After connecting the country-specific primary
a dapter, plug the power supply into an electrical
o utlet (100-240 VAC) and connect the DC plug of the
power supply with the DC socket of miniMAX. Push
the display of miniMAX sideways.

14. Changing battery

battery
30
Push and slide miniMAX back together and dis-
connect the DC plug of the power supply from the
DC socket. Open the battery cover on the back of the
device and remove the battery. Now insert a second
battery with the marked side upwards. Make sure that
the + and – contacts are correctly connected and close
the cover of the miniMAX.
battery cover