Wt550 Quick Start - Eden World Tour-Serie Schnellstartanleitung

E D E N | W O R L D T O U R S E R I E S | W T 5 5 0 - 6
The WT550 provides the perfect combination of features and power to give any bass player a solid tool to achieve great tone and at
volumes capable of handling all but the biggest stages. Delivering world class, World Tour tone in a compact package the WT550 is a
truly professional package designed to tour.
WT550 Front Panel Navigation:
1. :
Eden logo
Illuminates when unit is switched on.
2. :
Input Connect your instrument to the amplifier.
3. :
Input PAD indicator Illuminates when active (activate by
pulling Gain Control) reduces input signal level by -12DB.
4. Gain control:
Use this to set the input level for the
amplifier to suit your instrument. Pull this control to activate
the -12 DB level PAD feature.
5. :
Compressor indicator This illuminates when compression
is taking place.
6. :
Set level indicator
Use this to help set your input signal
level this should illuminate on your loudest/lowest notes.
7. :
Enhance
Providing Eden tone shaping use this control to
increase the amount of proprietary EQ sweep in your sound.
Pulling this control deactivates the auto compression circuit
on the amplifier.
8.
Bass: Use this control to increase or decrease the underlying
bass tone.
9. :
Low frequency control
Use this low frequency selector to
determine where in the low frequency range you cut or boost
your sound. (This feature is also foot switchable).
:
10. Low level control
Use this control to select the amount of
cut or boost you need at your required frequency.
:
11. Mid Frequency Control
Use this mid frequency selector
to determine where in the mid frequency range you cut or
boost your sound.
N E V E R C O M P R O M I S E
WT550 Quick Start Guide
| 1 0
T M
:
12. Mid Level Control Use this control to select the amount of
cut or boost you need at your required frequency.
13. High Frequency Control :
Use this high frequency selector
to determine where in the high frequency range you cut or
boost your sound.
:
14. High Level Control Use this control to select the amount of
cut or boost you need at your required frequency.
15. Treble :
Use this control to increase or decrease the overall
treble level.
:
16. EQ Clip
Illuminates when there is undesirable EQ clipping.
:
17. Master Controls the overall output level (volume).
18. Output Limit: Illuminates when the power section
experiences undesirable operation and the inbuilt protection
circuit is active.
:
19. Phones
Plug your headphones in to your amplifier.
Alternatively, this connection can be used to take a signal
to another amplifier.
20.
Mains Switch: Illuminates when unit is switched on.