BeeWi BBM200 Bedienungsanleitung Seite 3

3
ges among high light, low light and off, ready for pairing)
- Pairing: launch the Bluetooth utility software on the computer and follow the
instructions to discover and pair devices.
- Note: the mouse does not require any pairing code to be entered, if requested by
the Bluetooth utility software juste disable the pairing code in the utility window.
4. Operations
- The mouse will switch to battery save mode if it is not in use after 10 minutes,
the Bluetooth link is disconnected or the computer is switched off. It will be
reactivated by double clicking on the left button.
- If the mouse is disconnected during use or the connection button is acci-
dentally pressed, the mouse will have to be reconnected using the Bluetooth
utility software.
- When connected to the USB port for charging, the mouse scrolling wheel will
illuminate in blue color.
5. Troubleshooting
Here are a few hints in case the Bluetooth mouse cannot connect to the compu-
ter, or it does not work properly:
- Make sure a Bluetooth modem is installed on the computer and the Bluetooth
modem is turned on.
- If the mouse has been previously paired and it does not connect automatically
after double clicking the left button, delete the pairing relationship and redo
pairing in the computer.
- Make sure that the mouse is within the effective range of less than 10 meters.
- Make sure that there has been no modification in the Bluetooth utility software.
If anything has been changed, try to pair again.
- Make sure that the Bluetooth modem is not connected to another mouse or too
many other Bluetooth peripherals as this can affect the speed of the connection.
- Check the batteries and recharge or replace them if needed.
- Warning: charging non-rechargeable batteries might cause explosion.
ENGLISH