Charge The Battery; Battery Disposal - Logitech T650 Installationsanleitung

Logitech Wireless Rechargeable Touchpad T650

Charge the battery

Connect the Touchpad to
your computer using the supplied
charging cable The status light
blinks green while charging
Charge your Touchpad until
the status light stops blinking
A full charge powers your
Touchpad for about a month
(A blinking red light means
it's time to recharge )
10 English
Unifying
Logitech Unifying technology
®
connects up to six compatible
Logitech mice and keyboards to
the same receiver, using only one
USB port for multiple devices
To learn more, visit:
www.logitech.com/
support/unifying
Troubleshooting
Touchpad not working?
• Restart the Touchpad by
turning it off and then back on
• Check the Unifying receiver
connection
• Move the Unifying receiver
to another USB port on
your computer (Try connecting
directly to your computer
instead of using a USB hub )
• Remove any metallic objects
near the Touchpad
• If the status light blinks red,
recharge the battery
Problem with gestures?
• Avoid resting unused fingers or
your palm on the touch surface
Logitech Wireless Rechargeable Touchpad T650

Battery disposal

Remove the plastic label
on the Touchpad base
Remove the four screws from
the bottom case
Unplug the battery and take it
out of the case
Dispose of the battery and
product according to local laws
English 11