EGO LB4800E Gebrauchsanweisung Seite 12

TO INSTALL/REMOVE BATTERY PACK (Fig. 5)
EN
Charge before first use.
WARNING:
Always remove battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when not in use. Removing battery
pack will prevent accidental starting that could cause serious personal injury.
To install
◾ ◾
Align the ribs of the battery pack with the mounting slots in the blower's battery port.
◾ ◾
Press the battery pack down until it snaps into position.
To remove
WARNING:
Always take care of your feet, children, or pets around you when
pressing the battery release button. Serious injury could result if the battery pack falls.
NEVER remove the battery pack when in a high location.
◾ ◾
Press the battery-release button; the battery pack will disengage from the
latch and the ejection mechanism will assist with removal.
◾ ◾
Remove the battery pack from the blower.
5
22
56V LITHIUM-ION CORDLESS BLOWER — LB4800E
Battery Release Button
Mounting Slot
STARTING/STOPPING THE BLOWER (Fig. 6)
◾ ◾
To start the blower, press down on the lock-off lever and hold it, then depress the
trigger. After a short delay the blower will begin to run.
◾ ◾
To stop the blower, release the trigger.
ADJUSTING THE AIR VELOCITY (Fig. 6)
6
Air Velocity Adjusting Knob
The blower is equipped with an incremental speed regulation to control air speed.
To increase the air velocity, turn the air velocity adjusting knob clockwise to the "rabbit"
position; To reduce the air velocity, turn the knob counterclockwise to the "tortoise" position.
To enhance the air velocity, press the boost button to temporarily amplify the air speed to
the maximum.The blower will resume the previous speed when this button is released.
56V LITHIUM-ION CORDLESS BLOWER — LB4800E
Boost Button
Lock-off Lever
Trigger
23
EN