Cleaning And Maintenance; Technical Specifications - Toolland VL106 Bedienungsanleitung

Connect the device to the mains and switch on.
Leave the device to warm up for at least five minutes.
Point the heated tip towards the weed. Press firmly into the soil to reach the
roots. Hold the tip against the roots for 15 seconds.
Pull out the tip and proceed to the next weed.
Stronger weeds or woody stems (wild grass, roots, etc.) may require a repeat
application. If necessary, repeat this procedure after a few days. Do not use this
device on flower beds or lawns.
Switch off the device and disconnect from the mains after use. Leave to cool
down completely.
6.

Cleaning and Maintenance

Disconnect the device from the power supply and allow to cool completely before
cleaning, maintenance or storage.
Clean the device and accessories before storing.
Wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
Storing
Make sure the device has completely cooled down before storing.
Store the device, its accessories and this user manual in the original packaging.
Always store in a cool and dry place.
7.

Technical Specifications

input voltage ......................................................................................... 230-240 V~, 50 Hz
max. power ............................................................................................................ 300 W
max. temperature ................................................................................................... 200 °C
cable length ............................................................................................................ 35 cm
IP rating ................................................................................................................... IPX4
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 02 – 31/01/2018
VL106
6 ©Velleman nv