Xiaomi Snoppa M1 Schnellstartanleitung Seite 5

3.Turn on and turn o
A. With Snoppa App
Power on
Notice:
Please connect the Bluetooth of the gimbal in the Snoppa
App setting panel, instead of the mobile phone's system setting panel.
Power o
4
Turn on the Bluetooth of the phone,
launch Snoppa App, click the Bluetooth
icon on the edge of the interface and
enter the Bluetooth setting.
Connect to SNOPPA－xxxx
Default password: 000000
To reset the password and device name,
press the button and hold for 10 seconds.
Once connected the green light on the
gimbal will start blinking, and the
Bluetooth icon will change and dispaly the
gimbal battery level.
Collapse the tilt-axis to the grip, quit Snoppa app,
and the gimbal will power o after 20 seconds
without any operation.
Pull out the grip, rotate the
tilt-axis of the phone until the
intersection angle is more than
60 degree, and M1 will start to
work automatically.