Important Instructions For Use; Function Description - Lenz Lithium Pack Rcb 1800 Gebrauchsanweisung

IMPORTANT INSTRUCTIONS FOR USE

Operation with heated Lenz sock
The optimal heating power is only reached when the socks, boots or soles are dry.
￭
Do not operate the device at the highest heating power for longer than several minutes.
￭
Always set the product to a low or medium heat output to maintain a comfortably warm
￭
temperature (the heater should be virtually unnoticeable).
Operation with heated Lenz vest / brace
The optimal heating power is only reached if the vest / brace and other tops you are wearing are
￭
dry.
Do not operate the device at the highest heating power for longer than several minutes.
￭
Always set the product to a low or medium heat output to maintain a comfortably warm
￭
temperature (the heater should be virtually unnoticeable).
Operation with heated Lenz gloves
The optimum heat output can only be reached when the gloves are dry.
￭
Do not operate the device at the highest heating power for longer than several minutes.
￭
Always set the product to a low or medium heat output to maintain a comfortably warm
￭
temperature (the heater should be virtually unnoticeable).

FUNCTION DESCRIPTION

lithium pack rcB 1200 battery pack / lithium pack rcB 1800 battery pack
The battery packs have three operating modes: POWER OFF – STANDBY – IN USE. They are
indicated with the heat setting display (Fig. 1.2) on the battery packs and the remote control. The
number of illuminated LEDs corresponds to the selected heat setting.
POWER-OFF:
The battery packs are completely turned off and the heat setting display (Fig. 1.2) is
￭
permanently off.
They can only be switched on with the control button (Fig. 1.3) of the battery packs.
￭
Note:
The battery packs cannot be switched manually to POWER OFF mode!
– 27 –