Cabasse STREAM 3 Betriebsanleitung Seite 22

e n g l i s h
CONNECTIONS
Stream 3 has been designed for trouble free wiring, the
only possible mistake is the reversal of right and left when
hooking up the satellite speakers or using the RCA-RCA
connections between the Santorin 21C-W and a source.
Please follow carefully the quick plug play procedure.
CAUTION ! To prevent the risks of electric shock take
care to completely insert plugs of mains cords.
SUBWOOFER ADJUSTING
Take care positioning the sector switch 110-120V/220-240V
in the right position according to your country.
The POWER switch (located on the back) of the subwoofer
has 2 positions:
OFF : Stream 3 is disconnected from the power supply
network.
ON : the power LED is green.
STAND-BY MODES: Select one of the two possible modes
using the POWER MODE sw tch on the back of the subwoo-
fer. Switch off and on to validate a new setting.
- FULL AUTO MODE: any sound signal arrival from any
wired or wireless source connected to the Stream 3 will turn
the system on. Any prolonged lack of s gnal will turn the
system back to stand-by. The wifi and bluetooth modules
remain on, Bluetooth pairing is always possible. The power
LED is red during stand-by mode.
- ECO AUTO MODE: the wifi and Bluetooth modules are
turned off to minimize the power consumption down to
0.19 W.
STAND-BY MODE ACTIVATIONS:
Auto-stand-by: after 6 minutes with no activity coming from
the selected source. "No activity" means:
o For a RCA source: No sound signal
o For an optical source: No light=source off
o For a Bluetooth source: source is off or disconnected
o For a wifi or RJ45 source: no streaming running.
Manual stand-by: push the power switch of the Stream
remote control. When a wifi or RJ45 source is being played,
stand-by activation needs 5 seconds in order to stop the LAN
flow.
OPERATION MODE ACTIVATIONS:
Auto-on with the activation of a source connected to the
Stream 3. Under FULL AUTO mode, a Bluetooth pairing with
a smartphone and its selection as a source will automatically
turn the Stream 3 on.
Manual on: push the power switch of the Stream remote
control.
Turning the system on from FULL AUTO stand-by takes 5
seconds and it takes 40 seconds from ECO AUTO stand-by.
:
7
22
USE OF STREAM 3 WITH THE DEDICATED
REMOTE CONTROL
Stream 3 can be used from the end of the quick set-up pro-
cess (pages 5 and 6).
Switch the ON/OFF button to ON and power on one of the
sources connected to Stream 3 to get the system ready and
enjoy the Cabasse sound.
Eight dedicated keys are enough to run the Cabasse system:
- 1 to power on or stand-by Stream 3
- 4 to temporary mute the volume
- « Vol+ » 3 to raise then sound level
- « Vol- » 2 to lower the sound level
- 5 and 6 to select previous or next track
- 7 to play or select stand-by
- 8 to select sources
SELECTING AND PLAYING SOURCES WITH
THE REMOTE CONTROL
Stream 3 offers 4 different inputs that can be selected with
the (8) key of the remote control:
- One S-PDIF optical digital input, identified by the red LED
in the IR module. To be connected to a TV, a digital video
tuner and/or recorder, a CD player or any source with optical
output.
- One RCA analog input, identified by the green LED in the IR
module, mainly used to connect a TV, a DVR or a dock.
- One Bluetooth module, identified by the blue LED in the IR
module, mainly used to play audio files stored in tablets and
smartphones as well the soundtracks of all the applications
available on an Apple or Android machine.
- One LAN-WLAN module, identified by the orange LED in
the IR module that enables the Stream 3 to become the audio
player of your domestic network. Easy play with the Cabasse
application for Apple or Android for smartphone or tablet of
all shared audio files and more.