Special Playback; Picture Search; Still Image; Vertical Lock Control - Marmitek TLV 9600 Bedienungsanleitung

Special Playback

• During picture search, noise
(horizontal bars) will appear in
the picture.
• The sound is muted.
• If still mode continues for 5
minutes or more, the VCR will
go into stop mode to avoid
damaging the tape.
• If the image is unstable (rolling
vertically), adjust the tracking
control to correct.
• During recording check
operations, recording is
suspended momentarily.

Picture Search

1 Press the FF/CUE (or REW/REVIEW) button, during normal
playback.
• The image can be seen while the tape is advanced (or rewound) at
high speed.
2 To return to normal playback, press the PLAY button.

Still Image

1 Press the PAUSE/STILL button, during normal playback.
• A still image can be viewed.
2 To return to normal playback, press the PLAY button.
• With each press of the PAUSE/STILL button, the still image is
advanced one image (frame).

Vertical Lock Control

During still image mode,
1 Press the TRACKING + button to reduce the vertical rolling of the
image.
2 If it cannot be corrected, press the TRACKING - button.

Slow

1 With each press of the FF button, during still image mode, the
slow speed will change as indicated below. 1/15times
1/20times 1/30times (forward direction)
2 With each press of the REW button, during still image mode,
the slow speed will change as indicated below. 1/15times
1/10times 1/5times (forward direction)
3 To return to normal playback, press the PLAY button.

Recording Check

During recording, press the REC CHECK button.
• The tape will be rewound for about 5 seconds and slow play mode
will be performed. The VCR will then return to the previous
recording mode.
24