Basic Parameter; Instruction; Troubleshooting; Attention For Installation - CombiSteel 7455.1075 Gebrauchsanweisung

Series Stainless Electric Griddle is designed by advantages of overseas products. They have features of new style,
reasonable structure, easy to operate, good warmer result and saving energy, with features of easy operation,
reasonable distribution and occupy less space. They are equipment for Chinese and Western food restaurant,
Karaoke room and fast-food restaurant.
A. Basic parameter
Model Name
7455.1075 Griddle
7455.1080 Griddle
B. Instruction
1. Double temperature controllers are besides two sides of the machine and they can be used alone.
The left one can control the temperature of the left vat; the right one can control the temperature of
the right one.
2. Shut on the power switch K1, the green indicator is on, at that time electricity reaches to the machine.
Rotate the temperature controller clockwise to the red point, at that time the yellow indicator is on and
the green indicator is off. The green indicator is on and the electric heating tube works again and the
temperature goes up again. It repeats again and again to make sure temperature is constant in the
setting range.
3. According to different food and adjust the needed temperature to get the deal result of making food.
C. Troubleshooting
Trouble
1. Shut on power switch K1,
the indicator is not on.
2. Yellow indicator is not off.
The ascend of temperature
cannot be controlled.
3. Indicator is not on, but
temperature control is
normal.
D. Attention for installation
1. The using voltage of the machine must be coordinated with the supplied voltage.
2. User should install a suitable power switch or air switch.
3. There is grounding screw behind this oven. The grounding blot should be connected with more than
2.5 square mm copper wire according to safety rules for safety sake.
4. Before using this product, please check all parts and power supply and ground connection. The shell of
this machine must be grounded well for safety sake!
Voltage Power
220V~240V 3 kW
220V~240V 3.5 kW
Cause
1. Fuse of power switch is burned.
2. The connection of power cord is not
well.
1. The connection of indicator is
wrong.
2. Temperature controller is out of
action.
1. The contact of indicator is not well.
2. Indicator is burned.
www.combisteel.com
Dimension
550x470x230 Single temperature controller
730x510x310 Double temperature controller
1. Replace a suitable fuse.
2. Firm power cord.
1.Correct it with right connection.
2.Replace temperature controller.
1. Firm connection.
2. Replace indicator.
Note
Resolution
3