Operation - AXIOMET AX-3005PQ Bedienungsanleitung

4. Features
•
dual LED display for voltage and current
•
coarse and fine adjustments of voltage and current
•
protection mode: current limiting
•
output connectors: insulated safety plugs
•
organic glass front panel / other panels made of steel
•
memory:3 programmable memories
•
computer connectivity: pc remote control via USB
•
software included for Windows XP, Vista and W7, W8, W8.1 (32 bits + 64 bits)
5. Description
The AX-3005PQ is a highly accurate, DC-regulated power supply with an adjustable output. This output
can be used for constant voltage (C.V.) and constant current (C.C.).
The output voltage can be adjusted between 0V and 30V when the device is in the constant
voltage mode. The current-limiting point can be set arbitrarily in this mode.
The output current can be adjusted continuously between 0A and 5A in the constant current mode.
The output current and voltage are indicated on the LED displays.
1 Power: on/off button
2 Off/On: output on/off
3 MEN: memory save
4 M1-M3: memory recall
5 Voltage/Current: select between voltage
or current
6 OCP: over current protection
7 CC indicator: constant current mode
CV indicator: constant voltage mode
8
9 Voltage display (volt)
10 Current display (ampere)
6.

Operation

Switching the Power Supply On or Off
1. Connect the included power cord to the back of the device [15] and plug the other end into a
suitable, earthed power socket.
Always connect the device to an earthed power socket.
2. Press the Power button [1] to switch the power supply on.
At this moment, there is no output voltage or current on the output terminals.
3. Press the Power button [1] to switch the power supply off.
11
Voltage/Current: select between voltage
or current for adjustment
12 Output terminals-
13 Earth (ground) terminal, connected to the
14 Output terminals+
15 Power supply socket
16 Fan
17 USB port (type B) for remote control via pc