Usage; Cleaning - Klarstein 10026943 Bedienungsanleitung

Before use
1. Remove all packaging material, labels and/or stickers from your toaster. Make sure there is no packaging
material remaining in the slots.
2. Insert the removable crumb tray into the crumb tray slot.
3. Select a location for the toaster. The location should be:
◦ A flat, heat-resistant, non-flammable surface
◦ At least 3 inches away from walls or back of the worktops
◦ At least one foot away from cabinet or shelving that may be above the toaster
◦ Away from flammable materials, such as curtains and wall fabric
◦ Away from a gas stove flame or electric element
4. Plug the power cord into 220-240Volt, 50Hz AC outlet. To minimize cord clutter on kitchen countertops,
use Cord Wrap located under the toaster.
Warning: Risk of scalding
The surface of the net, the heating element, the toasting slots or the side cover is hot, so, removing
the toasted bread must be carefully.
Operation
1. Most types of the breads can be toasted. However, the slice should not be approximately 100 mm x 100
mm x 10 mm, otherwise taking out is related with a risk of burning.
2. The slice should be placed in the centre of slot.
3. After insert the bread into the slots, select the designed darkness setting(toasting time) by the Bread
Browning Lever and press the Push knob down until it locked. The auto-adjusting bread guides (located
inside the toasting slots) will automatically centre the bread for even browning. After the designed darkness
setting is over, the bread will pop up automatically and the Push knob and auto-adjusting bread guides will
return to its original position.
Warning: Risk of electric shock
Do not immerse the toaster in water. After use and before cleaning, unplug the toaster power cord
from the power outlet.
Clean the toaster regularly. This appliance contains no user serviceable parts and requires little maintenance.
Leave any servicing or repair to qualified personnel.

Usage

Cleaning

10