RCS AUDIO-SYSTEMS DVD-200X Bedienungsanleitung Seite 30

L/R
During VCD/SVCD playback, press L/R repeatedly to select the channel of audio-output: Left/Right/Mix/Stereo.
N/P
Press the button on the remote control and choose or Auto NTSC PAL for the TV system.
PBC
During VCD/SVCD playback, Press PBC to select the mode of PBC On or PBC Off.
SLOW
During DVD, VCD or SVCD playback, press SLOW for slow motion playback.
Once you press SLOW, the disc will play at different speed. Press PLAY to resume normal playback.
V-MODE
Press V-MODE key, you can select different video output mode (YUV, RGB, etc.). If you get no picture when using the SCART
connector, repeatedly press V-MOE until you get a picture.
RETURN
When SVCD/VCD disc playing, press RETURN button to the main menu (PBC ON only).
HD/Res.(HD-Mode)
Press the button to switch HD video output resolution
Note: Under HD mode, this button is used to select the output resolution.
Your DVD player can generate some resolutions that may not be supported by your TV set. If this happen ,your TV screen
will probably turn black. To solve the problem, please repeatedly press "HD/Res." button until you select a resolution that
can be well supported by your TV set.
PROGRAM
In complete stop state (press STOP button twice), press PROGRAM button enter the Play Mode menu
Mode
Normal: Shuffle mode is cancelled
Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track, playback jumps to a
random chapter/track.
As the end of each chapter/track is reached, another random chapter/track will be played until all
tracks/chapters have been played or the Shuffle mode is cancelled by toggling to a different "Mode"
option.
PROGRAM: To enable programmed playback mode
30
DVD-200 X