Starting Your Vooni Video Grabber:
Make sure that the battery is charged and that the memory
card is in place. Press the On/Off Menu button for
approximately three seconds.
Upon being powered up, the Vooni Video Grabber starts
off in video recording mode and the following information
is shown on the display:
Video recording
mode
SD-card
in place
Volume level
N.B.! If no memory card is in place, the message
No Card appears on the display.
VGA PAL
TF
VOL 4
VOL+
OK
VOL-
Video format
Time
00:51:09
8
Battery
charge
status