Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. To stop the count up process , press START/STOP button. The "" becomes solid.
4. Press CLEAR button to clear the setting back to 0:00.
HELPFUL HINTS
If the receiver and/or the transmitter display LLL or HHH instead of the probe temperature, wait for probe to
reach room temperature. If LLL or HHH is still displayed it is likely the internal probe wire has shorted out
either through moisture or heat damage.
Do not immerse the probe in water while cleaning.
Do not allow the probe or probe wire to come into contact with flames. If cooking with grill cover closed,
only use medium or low heat.
If the temperature displayed seems to read too high or the temperature seems to increase too quickly
check to make sure the probe tip is not poking through the food to outside. Reposition the probe tip in the
center of the thickest part of food. Avoid touching bone or heavy fat areas.
Cautions
1) Always wear a heat resistant glove to touch the stainless steel probe sensors or wires during or just
after cooking. Do not touch with bare hands.
2) Keep the stainless steel probe sensors and wires away from children.
3) Clean the stainless steel probes and dry thoroughly after each and every use.
4) Do not use the receiver in the rain. It is NOT rain proof. The transmitter is rain proof but not water
tight. Do not immerse in water.
5) Do not expose the plugs of the stainless steel probes or the plug in holes of the transmitter to water or
any liquid. This will result in a bad connecting and faulty readings.
6) Do not expose the receiver or transmitter to direct heat or surface.
7) Do not use stainless steel probes in microwave oven.
8) The Barbecue Thermometer registers temperatures as low as 32 ºF (0 ºC) and as high as 572 ºF (300
ºC). LLL will be displayed below 32 ºF and HHH will be displayed above 572 ºF. Do not use the
stainless probe sensor above 572 ºF. Doing so will deteriorate the wire.
9) Not Intended for Use by Persons ages 12 and Under.
Werbung
