Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Registration is complete when the receiver shows the probe temperature .
Auto Off feature:
The receiver will turn off automatically if it hasn't receive the temperature signal from the transmitter
for more than 30 minutes ,A beep will sound for one minute before it shuts down.However,the Auto
Off feature will be automatically disabled if the timer is running.
Measure meat temperature to USDA doneness temperature range
1. Press MODE to select thermometer mode. The upper display will show a small MEAT and a meat type
such as BEEF.
2. Press MEAT to select meat type. PROG (program), GBEEF (ground beef), GPOUL (ground poultry) ,
BEEF, VEAL, CHCKE (chicken), PORK, POULT (poultry) , LAMB & FISH.
3. Press TASTE to select the level of doneness for the meat type selected. RARE, MED RARE, MEDIUM,
MED WELL and WELL DONE.
4. Once the temperature of meat reaches the preset doneness level the receiver will beep and the LCD
backlight will turn red.
Measure meat temperature set to your specific taste
1. Press MODE to select thermometer mode. The upper display will show a small MEAT and a meat type
such as BEEF.
2. Press HR or MIN to raise or lower the set temperature. As you press HR or Min the display changes to
PROG (program). Holding the button will raise or lower the temperature setting rapidly. Pressing MEAT will
return you to the preset USDA ranges.
3. Once the temperature of meat reaches the preset doneness level the receiver will beep and the LCD
backlight will turn red.
Timer
Count down
1. Press MODE to select timer mode. The upper display will show a small TIMER and 0:00.
2. Press HR and MIN button to set the timer. Press START/STOP button to start countdown. "" will blink
for every second.
3. To stop the countdown process , press START/STOP button. The "" becomes solid.
4. Press HR & MIN buttons together to clear the setting back to 0:00.
Count up
1. Press MODE to select timer mode. The upper display will show a small TIMER and 0:00.
2. Press START/STOP button to start count up. The "" will blink for every second.
Werbung
