Care And Maintenance - CO/Tech 18-1245 Bedienungsanleitung

If you want to switch a heater on when the temperature falls
The factory default setting of the thermostat is an activation temperature of 5 °C.
If you are happy with this setting, all you need to do is:
1. Plug the thermostat into a wall socket. It will switch on automatically and
the LED indicator will shine red.
2. Plug a heater (electric fire, radiator, etc.) into the socket of the thermostat.
3. Switch the heater on. When the temperature has fallen to 5 °C, the power from
the wall socket passes through the thermostat and energises the heater plugged
into the thermostat. The indicator then shines green.
If you want to change the temperature setting from
the factory default setting
1. Switch the thermostat on by pressing [
2. Press or hold in [ ▲ ] or [ ▼ ] to set the temperature.
3. The new temperature has now been set, you do not need to confirm it in any way.
If you want to switch a cooler on when the temperature rises
1. Switch the thermostat off and check that the snowflake symbol is displayed.
2. If the flame symbol is displayed, change it to the snowflake by holding in [
and [ ▲ ] at the same time until the snowflake appears.
3. Switch the thermostat on.
4. Press or hold in [ ▲ ]/[ ▼ ] and set the desired temperature for when you want
the connected air cooler/cooling fan to be switched on.
5. Plug the thermostat into a wall socket.
6. Plug the air cooler/cooling fan into the socket of the thermostat.
7. Turn the air cooler/cooling fan on. When the ambient temperature has risen to
the set activation temperature, the power from the wall socket passes through
the thermostat and energises the cooling device plugged into the thermostat.
The indicator then shines green.
Note: When the temperature has risen to the set activation temperature there is
a delay of about 3 min before the socket of the thermostat is energised.

Care and maintenance

• If it is dusty, the thermostat should be removed from the wall socket and vacuum-cleaned.
• If it is not to be used for an extended period, the thermostat should be unplugged from
the wall socket and stored in a dry, dust-free environment, out of children's reach.
].
5
]