Description Of The Device; Package Contents; Checking Condition And Contents Of The Package - Electronica Technologies 9910 Bedienungsanleitung

ELECTRONICA-Technologies

1. Description of the device

The audiometer 9910 uses air conduction to screen for hearing loss. The tone is presented
through speakers in the headphones worn by the patient.
The operators can set the frequency, hearing level, and left or right-side tone delivery. A
patient feedback lead (accessory, as an option) can be used. It gives signal to the
audiometer and by the same to the operator who knows if the sound has been detected or
not (lead fitted with a pushbutton).
The device is AC-powered (or from an integrated rechargeable battery, as an option), with
a circumaural headphones so called "standard"(or with a high noise attenuation
circumaural headphones, as an option).
It is a pure-tone air-conduction type-4 audiometer (Standard: EN 60645-1).

2. Package contents

The device is delivered in a shock-proof briefcase containing:

The audiometer electronic box 9910

A headphones(cable: about 3 meters )

A power adapter (cable:1,70 meters)

An audiogram card

The user manual

Patient feedback lead (accessory as an option) (cable: about 1,20 meters)

3. Checking condition and contents of the package

When receiving the equipment, state and contents of the briefcase have to be checked and
make sure the audiometer 9910 and its accessories are in good working order.
If there is any problem, the assembly should be returned to the retailer. Keep the original
packaging, which is designed to protect the goods during shipping.
Audiometer 9910
Rev. January 2017
Version EN1_H
Series 9000 AUDIOMETERS
Page 21