Software Updates - EuroLite DMX AIO Bedienungsanleitung

Control via app
The device can be controlled via an ArtNet app.
1. Download the app from the AppStore or PlayStore on your iOS or Android device.
2. Press the button BRIDGE and use the MENU button to navigate through the main menu until the display
indicates the menu item "Mode 04 WiFi > DMX OUT". Confirm with ENTER.
3. Press the MENU button to return to the main menu. Select the menu item "System Setup [WiFi]" and
confirm with ENTER.
4. Select "WiFi-ArtNet [Local]" and confirm with ENTER again. You can now set the SSID and IP address
via the menu items "SSID" and "IP Address".
5. Confirm your settings by selecting the menu item "CWIFI SSID & IP" and pressing ENTER.
6. You can now connect your iOS or Android device to the recorder. Use the default password 12345678.
7. Start the app and call the network settings. Enter the IP address of the recorder here.
8. The recorder can now be controlled via the app.
9. Menu item [Set Restore] allows retting the network settings. Use the password 1224.

Software Updates

Use the supplied SD card to install software updates on your device:
1. Store the new software in the root directory of the SD card.
2. Insert the SD card into the respective slot on the device and press the button MENU so many times until
the display indicates "System setup [new software]".
3. Confirm with ENTER.
19/20 00119420, Version 1.0