Bridge Mode - EuroLite DMX AIO Bedienungsanleitung

Bridge mode

In bridge mode, the device works as a signal converter. When you press the button BRIDGE, the respective
LED lights and you can use the buttons MENU, ENTER, UP and DOWN to navigate through the different
bridge modes. The network settings can be configured in the [System Setup] menu.
In DMX splitter mode, three different modes can be selected for splitting the DMX signals: input 1 split to
output 1 and 2, input 2 split to output 1 and 2, or input 1 and 2 distributed to output 1 and 2.
In DMX merger mode, four different modes are available for merging both DMX inputs: HTP (the highest
DMX value takes precedence), LTP latest DMX value takes precedence), Override (both inputs are
(the
combined to form an output signal by setting a start address for each input), and Backup (when the signal at
input 1 is lost, the signal of input 2 will take output priority.
17/20 00119420, Version 1.0