Instruction Manual - AKO BA-1047 Bedienungsanweisung

Operating Instructions
1
2
3
4
1 Warning light (flashing = equipment switched on)
3 Earth connection
5 Fixing screws for hook
Description of function
Put the equipment into service by connecting the plug to a mains outlet. If the warning light (1) flashes in
sync with the pulses, the equipment is working correctly..
If the warning light (1) does not flash after connection to mains,
please check for correct mains voltage and proper connection. If no problem can be found, have the
equipment checked by an expert.
Important Notes:
The hook (6) provided must be fastened to the back of the equipment using the screws (5). The equipment
must be mounted on a vertical, non-flammable wall with the earth and fence connections pointing downwards.
See illustration above.
For outside installation the device must also be protected against exposure to rain and direct sunlight.
The equipment gives no warning if the electric fence is faulty.
This equipment carries a 3-year warranty in accordance with our Warranty Terms & Conditions!
Please see the attached Operating Instructions for safety tips, earthing, commissioning, warranty
terms and conditions and potential sources of fault!
SERVICE Addresses:
Please contact your specialist dealer
6
Not suitable for use in stables or
cowsheds!
230 V
~ connection!
2 Fence connection
4 Mains cable
6 Hook for suspension mounting
- 3
-
-EN-
6
5
Version : 2014.1