Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
III. CALIBRATION
1. Reset the scale by pressing [ON/OFF] key.
2. Wait until the LCD displays "0.00", then
3. Press [UNIT] key again, the LCD will display
4. Add the required calibration weight, the
5. Remove the calibration weight and press
IV. SPECIFICATION
Calibration: Auto calibration
Tare range: Tare full capacity
Auto-off: 60 seconds off
Operation temperature: 50 – 86 degrees
Fahrenheit (10 – 30 degrees Celsius)
Power: Battery included
dienungsanleitung DW5.indd 6
press and HOLD [UNlT] key for 3 seconds
until the LCD displays "CAL". Then release
the [UNIT] key.
"CAL", followed by the required calibration
weight.
display will show "PASS" and return to
normal weighing mode.
[ON/OFF] to turn off the scale. The
calibration is fi nished.
LEUC
P.O.B
02.04.14 11:3
Werbung
Inhaltsverzeichnis
