Technical Specifications - Buffalo GK640-E Bedienungsanleitung

Error Items Code Error Beep
HVT-I Power E41 One long beep
for 2 sec.
Error
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code "E41"
appears again. If the symptom persists, contact the nearest
service centre.
HVT-II Power E42 One long beep
Error for 2 sec.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code "E42"
appears again. If the symptom persists, contact the nearest
service centre.
EEPROM Error E5 One long beep
for 2 sec.
Remedy
Press CANCEL button one or more times and try to start a
memory heating. If the error code "E5" persists, contact your
nearest service centre.
For any codes not listed above, or if the suggested solution does not solve the
problem, contact your local Buffalo Customer Care Centre.
GK640-E_GK641-E_XEU_DE68-04279B-01_EN.indd 29
technical specifications
Buffalo strives to improve its products at all times. Both the design specifications and
Cause
these user instructions are thus subject to change without notice.
The circuitry inside the oven is not
By right of the common regulation 2/1984 (III.10) BKM-IpM. we as distributors testify,
working correctly.
that the GK640, GK641 ovens of Buffalo comply with the undermentioned technological
parameters.
Power source
The circuitry inside the oven is not Power consumption
working correctly.
Output power
Operating frequency
Dimensions (W x H x D)
Memory IC (EEPROM IC) is not
working correctly.
In this case, other features except for
Volume
memory function work properly.
(You can operate the oven manually.)
Weight
Noise level
English - 29
Model GK640
Microwave
3200 W
1850 W (IEC-705)
Outside
Oven cavity
Net
557
43 26
464
530
444 486
10
GK641
230 V ~ 50 Hz
3000 W
1500 W (IEC-705)
2450 MHz
464 x 368 x 557 mm
370 x 190 x 370 mm
26 liter
32 kg approx
54.5 dB
1000
514
2014-06-27 6:49:56