Kenwood KCA-S210A Bedienungsanleitung Seite 7

■ If the unit you are connecting belongs to group B
1
Either switch the centre unit power off, or select another
source, then set the switching unit AUX switch to "ON".
2
On the centre unit, select <DISC1 or CH1> .
The sound input to the AUX terminal will now be output.
The centre unit display will stay in the following state:
Disc No.=1, Track No.=1, Playing time = 0 min 0 sec
NOTE
If you want to listen to the sound from the unit connected to the TO CHANGER 1 terminal of the
switching unit, first either turn the centre unit power off, or select another source, and then set the AUX
switch to "OFF", and select <DISC1 or CH1>.
■ If the unit you are connecting belongs to group C
Turn the centre unit power off, then set the switching unit
1
AUX switch to "ON".
2 On the centre unit, select <DISC2 or CH2>.
The sound input to the AUX terminal will now be output.
NOTE
If you want to listen to the sound from the unit connected to the TO CHANGER 2 terminal of the
switching unit, turn the power off, set the AUX switch to "OFF", and then select <DISC2 or CH2>.
■ If the unit you are connecting belongs to group D
Turn the centre unit power OFF, then set the AUX switch on
1
the switching unit to "ON".
2 On the centre unit, select <AUX>.
The sound input to the AUX terminal will now be output.
2CAUTION
Leave the AUX switch in the "ON" position. If you move the AUX switch on the switching unit to the
"OFF" setting, <AUX> will not appear when you select the source.
MD/CD 1-2
or
CH
English
-7