Controls - Electrolux WHSL9062CN Gebrauchsanleitung

4. CONTROLS

A B
Button Function
KEYBOARD ON
Press briefly: Activates the keyboard functions.
If the motor is not turned on.
Press briefly: The keyboard switches off.
A
Keeping the button pressed for approximately 3 seconds
activates/deactivates the keyboard lock.
MOTOR ON
Brief pressure: Motor off.
Activates speed one.
MOTOR OFF
B
Keeping the button pressed for approximately 3 seconds
activates/deactivates the H2H function and the remote control.
C Activates speed two.
D Activates speed three.
Activates INTENSIVE 1 speed for 10 minutes. At the end of
this time the system will automatically return to the speed set
before. It is disabled by changing speed or pressing button A.
E
Press and hold the button for approximately 3 seconds,
with all the loads turned off (Motor and Lights), to turn the
Activated Charcoal Filter alarm on/off.
Activates INTENSIVE 2 speed for 5 minutes. At the end of
F this time the system will automatically return to the speed set
before. It is disabled by changing speed or pressing button A.
Activates BREEZE speed for 60 minutes. At the end of this
G
time the motor switches off. It is disabled by changing speed
or pressing button A.
Filter alarm button. This button is normal off. It is only displayed
with the filter alarm is triggered. The alarm can be reset by
pressing and holding this button for approximately 3 seconds.
H
Indicator button H2H.
L This button is normally off. It is only displayed when the hob is
connected to the Hood.
With motor off
press briefly: activates/deactivates the ACT function.
With motor on: press briefly to activate the ACT function. The button turns red.
With motor on: press briefly to deactivate the ACT function. The button turns white.
M
With the motor turned off: Press and hold the button for
approximately 3 seconds, to start calibration of the ACT
system, which lasts for 3 minutes. End with 3 Beeps
WARNING! DO NOT SWITCH ON THE MOTOR IF ANY UNUSUAL NOISES ARE HEARD. CONTACT
TECHNICAL ASSISTANCE IMMEDIATELY.
Press briefly: Turns the lighting system on and off at maxi-
mum intensity.
I
Press and hold to change the lighting intensity up or down. -
C D E F G H L M
Led
Buttons (B+C+D+E+F+G+M) turn white.
Buttons (B+C+D+E+F+G+M) flash.
All the buttons are on.
The button turns from white to red.
ON: button C flashes 5 times.
OFF: button D flashes 5 times.
The button turns from white to red.
The button turns from white to red.
The button turns from white to red.
H flashes 5 times.
The button turns from white to red.
The button turns from white to red.
Button H is on fixed (30 seconds): indicates
the need to wash the metal grease filters. The
alarm is triggered after the Hood has been in
operation for 40 working hours.
Button H flashing (30 seconds): indicates the
need to change the activated charcoal filters,
and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in
operation for 160 working hours.
The button turns red.
ON: 4 flashes of button M.
OFF: 4 flashes of button M.
The button flashes.
-
ENGLISH 7
I