Cleaning The Blender Jug - Khapp 15180005 Bedienungsanleitung

Ice crushing function: Fill
the blender jug with ice
cubes no bigger than 2×2
cm. Press the button (15) to
start the ice crushing func-
tion. The appliance runs
in intervals so that the ice
cubes always fall down to
the blades until they are
crushed.
Smoothie function: Place
the required ingredients in
the blender jug. Press the
button (16) to start prepara-
tion. The appliance automat-
ically stops after 2 minutes.
• Always switch off the appli-
ance before removing the lid
or measuring cup and add-
ing more food.
• You can use the tamper to
scrape food down into the
bottom of the blender jug.
• Switch the appliance off by
turning the speed selector
to position 0 once you have
finished blending. Wait until
the blade has come to a
complete stop before re-
moving the lid.
UK
CLEANING THE
BLENDER JUG
• You can clean the blender
jug by filling it with warm
soapy water.
• Switch the appliance on us-
ing the smoothie function to
clean the blender jug, and
then rinse it under running
water. Dry the parts thor-
oughly.
• Take care not to touch the
blades at the base of the
blender jug during cleaning!
• Do not try to remove the
blade unit from the blender
jug! This will cause the
blender jug to leak!
• Clean the motor unit by wip-
ing it with a damp cloth. A
little washing-up liquid can
be added if the appliance
is heavily soiled. Do not
immerse the motor unit of
the appliance in water and
make sure no water gets
into the motor unit.
• Ensure the appliance is
clean and dry before stor-
age.
• Never use abrasive deter-
gents or solvents.
39