Khapp 15180005 Bedienungsanleitung Seite 6

PREPARATION
• Place the motor section (9)
on a flat surface and make
sure it is standing firmly.
• Place the blender jug onto
the holder on the motor sec-
tion so that the safety switch
is pressed down.
• Place the lid (6) on the
blender jug.
• Insert the measuring cup (1)
in the opening in the lid (6).
USE
• Lift the lid (6) off the blender
jug (may be a bit tight).
• Pour food into the blender
jug. Solid food such as fruit
and vegetables must be cut
into squares no bigger than
20×20 mm.
• NOTE! Never add liquid or
food above the maximum
mark on the blender jug.
• Place the lid on the blender
jug and screw it on securely.
• Plug in.
UK
• Place a hand on the lid and
switch on the appliance by
turning the speed selec-
tor (12) from position 0 to
a position between MIN
(low speed) and MAX (high
speed).
Note! The appliance can
only be turned on if the
speed selector is first set to
position 0.
Pic. B
• The appliance also has 3
fixed settings that can be
selected using the relevant
buttons (14, 15, 16).
If you press the selected
button again, the function is
cancelled.
Turn the speed selector to
Mode position.
Pulse function: Press the
button (14) to blend us-
ing the pulse function. The
appliance stops when you
release the button.
38
Pic. A