Klarstein 10031204 Bedienungsanleitung Seite 8

Application examples
• Ink Boxes, Seals, Pen Heads, etc.
• Dental, toothbrushes, electric shaver heads, razor blades
• Metal Dishwares, metal fittings, coins
• Sunglasses,Glasses
• Finger rings, necklaces, bangles, earrings
Cleaning process
1. Open the lid, and fill the stainless steeltank with water.
Running without water may damage the unit! The item
should be immerged well into the water.
2. The item should be immerged well into the water.
However, do not exceed the"MAX" mark.
3. Close the lid, and plug in.
4. Plug the machine into proper power source and press
" ON / OFF " switch button to start cleaning. When
washing, the indication light turns on. And it will finish
washing within tolerant time.
5. Press " ON / OFF " switch button to stop cleaning,
when it is in the cleaning process.
6. When the washing process is finished, unplug the
power source. Open the cover and take out the object.
Finally, pour out the water and clean the machine.
Cleaning methods
1. Put the object into the plastic cleaning basket under
cleansing water. The water level should be above the
articles but not exceed the mark.
2. For large items, place the item as shown.
3. When item to be cleaned needs extensive cleaning or
sterilizing, use "Enhanced Cleaning" first, then replace
with clean water and add about 5-10 ml of liquid soap
(used for washing hands) into the tank, and start the unit
with the working cycle as 90 s. After this working cycle
finished, the item can be cleaned extensively.
Usage
8