Produktinformation; Technical Specifications - Snakebyte POWER:PACK Bedienungsanleitung

EN
POWER:PACK™

PRODUKTINFORMATION

Thank you for choosing snakebyte's POWER:PACK™. Please read this guide for important safety and
health information and retain it for future reference.
CONTENT
1 battery (7000 mAh)
1 USB-C-charging cable
FEATURES
1. Attachment clip
2. Interlock
3. USB-C charging plug
4. Kickstand
5. Charging indicator
6. USB-C charging port
7. USB charging cable
OPERATING INSTRUCTION POWER:PACK™ SB911866
NOTE: Please fully charge the POWER:PACK™ before first usage!
CHARGING THE SNAKEBYTE POWER:PACK™
• Plug USB charging cable into the USB-C charging port of the POWER:PACK™ and connect it to a
standard USB Power Supply.
• Use of an USB Power Supply with 5V/2A is recommended for optimal charging.
• The blue LED's of the charging indicator flash during charging procedure.
• After completion of charging procedure, all blue LED's of the charging indicator will continuously
light up.
• Please disconnect POWER:PACK™ from the Power Supply after charging has been completed.
USAGE OF SNAKEBYTE POWER:PACK™
• Set the interlock to UNLOCK.
• Pull up the attachment clip and flip it backwards.
• Slide the POWER:PACK™ onto the backside of the Nintendo Switch™-Console until the USB-C
charging plug is securely connected to the charging port of the console.
• Flip the attachment clip to the front and push it down, so it encloses the console.
• Push the interlock into the LOCK position.
• The console will now be automatically charged by the POWER:PACK™.
• The current charging status of the POWER:PACK™ is indicated by the charging indicator.
TROUBLE SHOOTING
Nintendo Switch™-Console is not charging:
• Make sure the POWER:PACK™ is securely connected to the console.
• Make sure the POWER:PACK™ is charged.
• Make sure the battery of the Nintendo Switch™ console is not completely depleted (identifiable by
the fact that the console cannot be switched on at all). If the battery of the console is completely de-
pleted, please recharge the console with the original power supply, until it can be switched on again.

TECHNICAL SPECIFICATIONS

• Model number:
• Input Power:
• Output Power:
SB911866
USB-C 5V/1.5A
USB-C 5V/2A