Loading A Play List; And Sleep Mode; Bar Graph; Beat Counter - IMG STAGELINE DMP-240 Bedienungsanleitung

5.2 Loading a play list

GB
To replay a certain selection of titles, create play
lists with the file extension ".wpl", ".xml" or ".m3u"
on a computer and load them onto the DMP-240.
Important: The play list and the corresponding
MP3 files must be on the same storage medium.
The play lists must always be stored in the root
directory.
1) Press the button MODE (9). The display will
show
2) Turn the knob TRACK / ENTER (7) one step
counter-clockwise so that
will be displayed.
3) Press the knob TRACK / ENTER. The display
will show
4) Turn the knob TRACK / ENTER to switch over
between the selection of play lists (indication
) and the selection of MP3 files (indication
). For play lists, select
5) Press the button BACK (8) once. The display
will show
6) Turn the knob TRACK / ENTER to select the
desired USB port (5) and press the knob to con-
firm.
7) If there are several partitions on the USB stor-
age medium selected, select the desired parti-
tion with the knob TRACK / ENTER. If not, con-
tinue with the next operating step.
8) If the display shows
"TOTAL TRACK" (A) shows the number of avail-
able play lists, turn the knob TRACK / ENTER to
select a play list. The text line (N) will show the
name of the play list. If
is no play list on the USB storage medium
selected.
9) Turn the knob TRACK/ENTER to load the play
list and use the knob TRACK / ENTER to select
the title to be replayed from the list.
5.3 Indicating title information

and sleep mode

The display (14) offers a variety of information:
1. number of titles (A) in the folder selected
2. number of the title selected (B) if "TRACK" is
shown above the number
3. relative (L) and absolute (M) playing time of the
title selected; the seconds are divided into 75
frames
To switch over the playing time indication
between remaining time "REMAIN" (F) and time
already played "ELAPSED" (E):
18
and .
und
and .
and .
and the field
is shown, there
a) Press the button MODE (9). The display will
show
b) Turn the knob TRACK/ENTER (7) clockwise
one step so that
displayed.
c) Press the knob TRACK / ENTER. The display
will show
d) Turn the knob TRACK / ENTER to switch over
between "REMAIN" (F) and "ELAPSED" (E).
e) To return to the time indication, press the
button BACK (8) twice.
4. text line (N) for providing the following informa-
tion (ID3 tag):
< TITLE >* (K)
< ALBUM >*
< ARTIST >*
file name, no indication in the field (K)
* If a certain information has not been stored in the
.
MP3 file, there will be a question mark in the text line.
a) Press the button MODE. The display will
show
b) Turn the knob TRACK / ENTER until
and
c) Press the knob TRACK/ENTER. The display
will show
d) Turn the knob TRACK/ENTER to switch over
between the indicating possibilities men-
tioned above.
e) To return to the time indication, press the
button BACK twice.

5.3.1 Bar graph

In addition to the numerical time indication (M), the
bar graph (L) will show the playing time of the title
graphically by its length (relative time indication).
For the last 30 seconds of a title, the bar graph will
flash in its full length; for the last 15 seconds, it will
flash even faster.

5.3.2 Beat counter

After selecting a title, the beat counter will auto-
matically determine the number of beats per
minute. After a short time, the number will appear at
the bottom on the right of the display (Q). If the beat
counter is not able to determine a useful value (e. g.
in case of calm music titles), switch to the manual
mode:
1) Keep the button TAP (23) pressed until the indi-
cation "AUTO" at the bottom on the right of the
display disappears.
2) Shortly press TAP repeatedly to the beat of the
music so that the number of beats will be indi-
cated.
and .
and
and .
and .
are displayed.
and .
will be