Wella XPERT HS 71 Gebrauchsanweisung Seite 11

• Never short-circuit the battery. The contacts on the
dismounted battery must not be connected by
metal objects (e. g. hairpins, scissors, tail comb).
• Do not subject the battery to extreme tempera-
tures (under 0 °C or above +40 °C).
For example, avoid close proximity to heaters or
direct sunlight.
• Charge the battery 15 (Model: 1531582) only in the
appliance with the original accessory parts (plug-in
power supply device 10 (Model MN/UK: 152920)
or in the battery charger 8) and do not mix up the
connections when doing so.
• Charge the battery in dry rooms only and never
in close proximity to acids or easily inflammable
materials.
• After dismounting the battery, you must neither
connect the appliance to the connector cable 11,
nor place it on the connected battery charger 8.
Both can lead to the electronics being destroyed.
Specifications according to Machinery Directive 2006/42/EC
A-weighted emission sound pressure level at workstations at a distance of
1 m, L pA ≤ 70 dBA
Measured maximum noise emission value including uncertainty of measurement
according to EN ISO 4871. Determination of the values according to EN 60704-2-9
with reference to EN 60704-1
Vibration total value to which the hand-arm system is subjected, a h = 3.98 m/s
Measured maximum vibration total value including uncertainty of measurement.
Determination of the values according to EN ISO 5349-1/2
Designation of the Parts
1 Socket for the connector cable on
the appliance (for cable mode)
2 Charge contacts on the appliance
3 On/Off button
4 Cutter head
5 Adjustment lever to set the cutting
length
6 Charge status display / battery sta-
tus display
7 Charge contacts on the battery
charger
8 Battery charger
9 Comb attachment holder
10 Plug-in power supply device
(Model MN/UK: 152920)
11 Connector cable for battery charg-
er and cable mode
12 Bottle of oil
13 Cleaning brush
14 Comb attachments 4, 8, 12, 16,
20 mm
not visible:
15 Battery (Model: 1531582)
ENGLISH
2
9