zoopa Q165 Bedienungsanleitung Seite 15

How to insert and connect the battery
As soon as the battery is fully charged, you can insert the battery into the model.
Switch on the controller. The LED of the controller will start to flash. Now move the gas stick (left) up
and down until its end position. The LED will then shine permanently. Perform this step again.
Check the polarity of the battery before you connect it to the model!
Place the zoopa Q165 on a plain surface. The LED of the quadrocopter flashes fast at the beginning
and then passes to a slow blinking, which shows the successful connection to the controller.
First tries and flight advices
Before you start your first flight tests, make sure that there are no other people or animals around.
Keep an area of 3x3 meters free!
The orange blades show the front side of the model. The black blades show the tail of the
quadrocopter. The different colors provide a simple orientation during flight.
Power the gas slowly to test all functions at the beginning.
Rise / Descent
Move up the gas stick (left) to lift the model and move
it down to let it sink.
Right / Left
Move the Controllstick (right) to the left or right, to let
the model pan to the left and right
www.acme-online.de
ACME the game company