Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Changing the filter
30
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the
direction of the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it
out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter
into the appliance until it engages and close the
dust bag compartment lid.
Replacing the HEPA filter
The HEPA filter should be replaced once a year.
Press the locking tab in the direction of the arrow
to unlatch the exhaust grille and open it.
Release the Hepa filter by moving the locking lever
in the direction of the arrow and remove it from
the vacuum cleaner.
en
Werbung
