Change Tv Settings; Display Options; Sound Options; Configuring Parental Settings - Philips 43HFL2839T/12 Bedienungsanleitung

The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio
from connected audio device only (same as other
optical or co-axial digital audio outputs). If you want
to change connected device's volume level, you
should select that device from the source list. In that
case volume control keys are directed to connected
audio device.
Note: ARC is supported only via the HDMI1 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with
the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the Speakers option in the Settings>More menu as
Amplifier. The TV speakers will be muted and the
sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio
Control feature and CEC option should be set as
Enabled.

Change TV settings

To access the options listed below;
1- Press the Menu button
2- Highlight your selection
3- Press OK to confirm

Display options

Mode: Changes the picture mode to one of the
following: Cinema, Game(*), Sports, Dynamic and
Natural.
(*) Game mode option may not be available
depending on the current source selection.
Contrast: Sets the light and dark values of the image.
Brightness: Sets the brightness value of the image.
Sharpness: Sets the sharpness value. A high
sharpness value may result in a clearer, crisper image
depending on the content.
Colour: Sets the color value.
Backlight: Controls the brightness of the backlight.
The backlight function will be inactive if the Energy
Saving is set to an option other then Custom.

Sound options

Volume: Adjusts volume level.
Equalizer: Changes the equalizer mode.
Balance: Adjusts whether the sound is coming mainly
from the right or left speakers.
Headphone: Sets headphone volume. This option
will be inactive if the Headphone/Lineout option is
set to Lineout.
Sound mode: Sets the preferred sound mode.
AVL: Sets a limit to maximum volume output.
Headphone/Lineout: This option should be set to
Headphone if you have headphones or Lineout
if you have external amplifier connected to the
headphone jack.
Dynamic bass: Enables or disables the Dynamic
Bass. Increases the range of bass.
Digital Out: Sets digital out audio type.

Configuring parental settings

This feature is for restricting access to selected
content. It is controlled by a pin number defined by you.
These settings are located in the Settings>Parental
menu.
Note: Default PIN can be set to 0000 or 1234. If you
have defined the PIN(is requested depending on the
country selection) during the First Time Installation
use the PIN that you have defined.
Some options may not be available depending on the
country selection in the First Time Installation.
Menu lock: Menu lock setting enables or disables
the menu access.
Maturity lock (optional): If this option is set, TV
gets the maturity information from the broadcast and
if this maturity level is disabled, disables access to
the broadcast.
Child lock (optional): When Child Lock is set, the
TV can only be controlled by the remote control. In
this case the control panel buttons will not work.
Guidance (optional): This setting enables or
disables access some of the MHEG applications.
Disabled applications can be released by entering
the right PIN.
Set PIN: Defines a new PIN number.
Default CICAM PIN: This option will appear as
greyed out if no CI module is inserted into the CI slot
of the TV. You can change the default PIN of the CI
CAM using this option.
English - 6 -