Play Media Files From A Usb Drive; Media Browser Menu; Cec - Philips 43HFL2839T/12 Bedienungsanleitung

On the next screen, set your preferences using the
directional buttons and when finished, press OK to
continue.
You can set up your TV by following the First Time
Installation (FTI) screen with the following selections.
Digital Aerial installation
If Digital Aerial broadcast search option is turned
on, the TV will search for digital terrestrial broadcasts
after other initial settings are completed.
Digital Cable installation
If Digital Cable broadcast search option is turned
on, the TV will search for digital cable broadcasts
after other initial settings are completed. According
to your other preferences a confirmation message
may be displayed before starting to search. For
automatic installation in case your Cable network
supplier supports a Network-ID based installation
(e.g. Unitymedia), select Yes and press OK.
In case your Cable network supplier does not support
a Network-ID based installation please select No,
press OK and follow the instruction on the screen.
You can also select frequency ranges from this
screen. Enter the frequency range manually by
using the numeric buttons.
Note: Searching duration will change depending on
the selected Search Step.
Analogue installation
If Analogue broadcast search option is turned on,
the TV will search for analogue broadcasts after other
initial settings are completed.
Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast type during the search process and the
channels of it will be listed on the top of the Channel
List. When finished, press OK to continue.
Home Mode / Store Mode selection screen follows. It
is recommended to select Home Mode for home use.
After the initial settings are completed TV will start
to search for available broadcasts of the selected
broadcast types.
While the search continues a message may appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK to confirm.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
After all the available stations are stored, scan results
will be displayed. Press OK to continue. The Edit
Channel List will be displayed next. Press Menu
button to quit Edit Channel List and watch TV.
Note: Do not turn off the TV while initializing first
time installation. Note that, some options may not be
available depending on the country selection.

Play media files from a USB drive

You can play photo, music and movie files stored
on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the Menu button while in
the Media Browser mode will access the Picture,
Sound and Settings menu options. Pressing the
Menu button again will exit from this screen. You
can set your Media Browser preferences by using
the Settings menu.
IMPORTANT! Back up your files before making any
connections to the TV. The manufacturer will not be
responsible for any file damage or data loss. Certain
types of USB devices, for example, MP3 players
or USB hard disk drives/memory sticks may not be
compatible with this TV.

Media browser menu

Loop/Shuffle Mode Operation
Start playback with the
Play button and activate
Start playback with the
OK button and activate
Start playback with the
Play button and activate
Start playback with the
Play button and activate
,

CEC

This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Settings>More menu should
be set as Enabled at first. Press the Source button
and select the HDMI input of the connected CEC
device from the Sources list menu. When new CEC
source device is connected, it will be listed in source
menu with its own name instead of the connected
HDMI ports name(such as DVD Player, Recorder 1
etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
To terminate this operation and control the TV
via the remote again, press and hold the "0-Zero"
button on the remote control for 3 seconds. This
feature can also be enabled or disabled under the
Settings>More menu.
English - 5 -
All files in the list will be
continuously played in
original order
The same file will be
played continuously
(repeat)
All files in the list will be
played once in random
order
All files in the list will be
continuously played in
the same random order